EnglishGerman

Transfer System LT40

Home/Products / Transfer System LT40
  • Transfersystem LT40, Doppelzahnriemen System mit Werkstückträgern, Gesamtübersicht mit allen Komponenten. - Transfer system LT40, dual toothed belt system with workpiece carriers, complete overview with all components.
  • Transfersystem LT40, Umlenkung 90° UL40 zur Ausschleusung der Werkstückträger. - Transfer system LT40, deflection 90° UL40 for the extraction of the workpiece carriers.
  • Transfersystem LT40, Querausschleusung QA40 für die Ausschleusung der Werkstückträger. - Transfer system LT40, lateral transport QA40 for the extraction of the workpiece carriers.
  • Transfersystem LT40, Indexiervorrichtung IV40 für Bearbeitungen auf dem Werkstückträger. - Transfer system LT40, indexing unit IV40 for the extraction of the workpiece carriers.
  • Transfersystem LT40, Doppelzahnriemen System mit Werkstückträgern, Gesamtübersicht mit allen Komponenten. - Transfer system LT40, dual toothed belt system with workpiece carriers, complete overview with all components.
  • Transfersystem LT40, Umlenkung 90° UL40 zur Ausschleusung der Werkstückträger. - Transfer system LT40, deflection 90° UL40 for the extraction of the workpiece carriers.
  • Transfersystem LT40, Querausschleusung QA40 für die Ausschleusung der Werkstückträger. - Transfer system LT40, lateral transport QA40 for the extraction of the workpiece carriers.
  • Transfersystem LT40, Indexiervorrichtung IV40 für Bearbeitungen auf dem Werkstückträger. - Transfer system LT40, indexing unit IV40 for the extraction of the workpiece carriers.

The transfer system LT40 is a dual toothed belt system on which the individual workpiece carriers run at a speed of up to 20 m/min. LT40 is available in three sizes; so LT40 has an optimal configuration for every application. The workpiece carriers in six different sizes allow a load of up to 16.8 kg. They can be equipped with RFID so that they can be identified at any time. The conveyors are supplied and assembled according to the customer’s requirements with the selected components. Two types of drive controllers are available for the regulation.
The extraction of the workpiece carriers is performed by lateral transport, 90° deflection, 180° deflection or with a switch. The shock-absorbing pneumatic separating unit / stopper, utilised as stopper and pre-stopper, is used for stopping, separating and decelerating one or more incoming workpiece carriers. All components can be easily moved into any position thanks to the dovetail guide.
To execute operations on workpiece carriers, the indexing unit, which is integrated in the conveyor or the positioning unit with 1000N pressure and the placing unit for up to 60 kN vertical load are available.
As further components, the lifting / turning unit or the lift can also be installed into the transfer system upon customers request.

The motors of the transfer system LT40 are efficiency-optimized and are thereby energy efficient. They do not only meet the minimal EU requirements of efficiency class IE3, but with 75% efficiency they are even significantly better than the Super Premium efficiency class IE4 planned for the future.

Details:

Size Workpiece Carrier: 200 x 200, 200 x 240, 240 x 240, 240 x 320, 320 x 320, 320 x 480 mm
Drive Unit: directly integrated into the shaft
Max. load: 200 x 200: 7.0 kg
200 x 240: 8.4 kg
240 x 240: 8.4 kg
240 x 320: 11.2 kg
320 x 320: 11.2 kg
320 x 480: 16.8 kg
Max. pressure position unit: 1000 N
placing unit: 60 000 N

 

Please enter the details to download files.

x