The transfer system LT40 is a dual toothed belt system on which the individual workpiece carriers run at a speed of up to 20 m/min. LT40 is available in three sizes; so LT40 has an optimal configuration for every application. The workpiece carriers in six different sizes allow a load of up to 16.8 kg. They can be equipped with RFID so that they can be identified at any time. The conveyors are supplied and assembled according to the customer’s requirements with the selected components. Two types of drive controllers are available for the regulation.
The extraction of the workpiece carriers is performed by lateral transport, 90Â° deflection, 180Â° deflection or with a switch. The shock-absorbing pneumatic separating unit / stopper, utilised as stopper and pre-stopper, is used for stopping, separating and decelerating one or more incoming workpiece carriers. All components can be easily moved into any position thanks to the dovetail guide.
To execute operations on workpiece carriers, the indexing unit, which is integrated in the conveyor or the positioning unit with 1000N pressure and the placing unit for up to 60 kN vertical load are available.
As further components, the lifting / turning unit or the lift can also be installed into the transfer system upon customers request.
The motors of the transfer system LT40 are efficiency-optimized and are thereby energy efficient. They do not only meet the minimal EU requirements of efficiency class IE3, but with 75% efficiency they are even significantly better than the Super Premium efficiency class IE4 planned for the future.